- The Short Mounty Pole (MPOLE-SHORT) allows most loaders to reach heights of up to 3m from ground level.
- Place Corner Protectors with the Mounty Head or Mounty Head Major attachments.
- Place and retrieve, adjust and untangle ratchet straps with the Mounty Fork attachment.
- Easily throw straps over loads using the Mounty Throw attachment.
- With the Mounty Pole there is no need for platforms or ladders or any need to climb onto the load, thus avoiding falls from workplace vehicles.
- The pole itself will extend from 0.6m to 1.2m (2′-4′).
- Each Mounty Pole comes with a removable and universally threaded adaptor designed to screw into all of the Mounty Range.
The Mounty Pole currently has 7 different attachments that can easily be interchanged:
- Mounty Head (M-HEAD) – To lift CP60 & CP60LD corner protectors to height.
- Mounty Head Major (M-HEAD-MR) – To lift CP800, CP800LD, CP1150, CP2400LD corner protectors to height.
- Mounty Throw (M-THROW) – To launch straps over a load.
- Mounty Fork (M-FORK) – Used to place and retrieve, adjust webbing and slings on Hiabs
- Mounty Hook (M-HOOK) – Used to place and retrieve, adjust and place ratchet straps
- Mounty Boardmount (M-BOARDMOUNT) – Used to place, retrieve, adjust load protection boards
- Mounty Broom (M-BROOM) – For use on a lorry bed, whilst standing on the ground
Mounty Applicator – Quick How To Guide
